Bent Jack...

[92dakotahd]

i've got a small Travel trailer and it's my first. I was a newb and used the stabilizing jacks a bit too much for weight bearing. One of them is bolted to about a 6" plate, which is bolted to the frame. Although only about 2" is bolted to the bottom of the I on the frame, and it bent. Anyway to fix this and keep it strong?

[MASTERTECH]

i see this all the time replace the leveller and have some gussets welded into the I part of the beam also use blocks of wood so the jacks won`t have to extend so much